Use a tape measure to vertically measure each level, along with the overall height, of the preformed shell. Before digging, you will need to establish the required depth of the hole, along with the depth of each level. You can use a tape measure to double-check the pond outline’s dimensions. Step 4: Double-check pond dimensions and prepare to dig. The inner outlines should have the same allowance as well. This will help guide you as you excavate with an outer allowance of approx. Give the sand or spray paint marking a width of at least 2 inches (oriented outward) off the initial markings. The resulting outline should be a fairly accurate 2-dimensional depiction of all concentric features of the shell. This should clearly mark the outermost edge, along with any narrower levels of the shell. Now that the stakes firmly mark the circumference of the preformed shell, you can create a linear outline for the pond. Step 3: Create an accurate outline with sand or spray paint. You can use shorter stakes to mark the outlines of other depth levels too. This outline will come in handy, particularly if the base is narrower than the upper depth levels. Pro-tip for shells with built-in shelves: before lifting out the shell, use a stick to draw a line around the outline of its base. The height allowance would make it extra easy to align the stake to the edge prior to pounding it into the substrate. If the shell’s edges are irregular or are overhanging, the stakes should be taller than the height of the shell. This is a fairly foolproof way of staying true to the preformed shell’s surface area. Once you’ve determined the exact location and orientation of the pond, you can use upright stakes, poles, or sticks to mark its edges. Step 2: Use stakes or poles to mark the desired area for the pond. Ideally, the sources of these should be just a few feet off the edge of your pond. It helps to visualize the end result – create an illustration of the finished pond setup beforehand.Īn extremely important consideration is the location’s access to water and electricity. If the shape’s outline is irregular, test for the best fit by playing with different orientations. A preformed pond shell should be light enough to move around the garden while searching for the best location. photowind/įind an area of the garden that can accommodate the size of your desired pond. Step 1: Choose the right location for your pond.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |